FREE SHIPPING WITHIN USA ON ORDERS OVER $100

Champion Powerblend Pullover Hoodie | AS_S700

$ 31.94
Description 9-ounce, 50/50 U.S. grown cotton/poly 50/40/10 cotton/poly/black poly (Light Steel) 50/48/2 cotton/poly/black poly (Silver Grey) Double Dry technology wicks moisture Two-ply hood with dyed-to-match drawcords 1×1 rib knit sleeve cuffs and hem Front pouch pocket Embroidered Champion “C” logo at left cuff Woven back neck label S M L XL 2XL 3XL Body Length at Back 27 28 29 30 31 32 Chest 20 22 24 26 28 30 Set in Sleeve Length 36 36 3/4 37 1/2 38 1/4 39 39 3/8 Body Length at Back: Measured from high point shoulder to finished hem at back. Chest: Measured across the chest one inch below armhole when laid flat. Set in Sleeve Length: Measure from Center Back neck to shoulder point to sleeve hem.
placeholder
Session 1

Go over size selection
Fit recommendations
Pattern & Fit Adjustments
Materials needed
Preparing your pattern
Briefly discuss cutting layouts

Session 2

Step 5 – Apply Your Fusible Interfacing
Step 6 – Assemble Your Front Yoke Pieces
Ride The Wave *sewing with curves overview*
Step 7 – Assemble Your Back Pieces
Step 8 – Assemble Your Pockets
Step 9 – Sew Your Bound Buttonholes

Session 3

Step 10 – Apply Your Front Pieces
Step 11 – Sew Your Shoulder Seams
Step 12 – Assemble Your Left Sleeve
Step 13 – Attach Your Sleeves
Step 14 – Sew Your Side Seams & Sleeve Seams

Session 4

Step 15 – Finish Your Sleeve Hems
Step 16 – Attach Your Collar
Step 17 – Insert Your Zipper
Step 18 – Finish Your Hem

FYI: You will need to login to an existing account or make a new account before purchasing the workshop in order to access the videos smoothly!

 

ADD TO CART:

Purchase at houseofizzie.com

YOU WILL MAKE:

  • A jacket
  • Optional sizes from XXS-1X B-Block
  • Optional sizes from XXL-8X B-Block

YOU WILL NEED:

  • The It Takes Two Jacket PDF pattern
  • Color A fabric
  • Color B fabric
  • Lightweight to midweight fusible interfacing
    • *you may need different color interfacings for more extreme contrast color fabrics (such as black & white)
  • Matching all-purpose thread to your fabric
    • *you may wish to have matching thread to both your Color A and Color B fabrics on hand
  • 1x separating zipper
    • *see length requirements per size below
  • 3/8” (1cm) width drawstring trim
    • *see length requirements per size below
  • 1 3/8” (3.5cm) width soft elastic
    • *see length requirements per size below
Please note this workshop focuses on the self enclosed finishes included in the instruction booklet, specifically designed for woven fabrics. The videos will go in depth covering French seams, bias binding, and bound buttonhole construction methods. This workshop is NOT intended for makers looking to sew a KNIT FABRIC version of this pattern. Feel free to reach out: email [email protected] for any questions!
0
Your Cart